Safe Heating


We understand by safe heating a heating by radiators or underfloor heating using an electric boiler by ete for heating and hot water.

  1. It does not pollute.
  2. No noise
  3. No odors
  4. No risk of fire
  5. No explosion risk
  6. No risks of poisoning
  7. No breakdowns
  8. That warms up when it is cold maintaining a comfortable temperature.
  9. That the whole house is heated equally
  10. That it has no maintenance costs
  11. It does not have a fireplace and it does not stain the environment
  12. Does not consume oxygen
  13. Does not produce electromagnetic pollution
  14. It is the cheapest heating.

Once the previous list has been read, how many of the points do you suffer in the heating of your home, work center, commercial premises or other activity and how much you currently spend?

What is your current heating system?

  • Combustion boiler, gas, diesel, biomass.
  • Heat Pump
  • Electric radiators
  • Butane stoves.

Combustion boilers will be banned in the coming years for environmental reasons and also due to the high cost of fuel energy.

The Heat pump is a system that has an unstable performance, it works according to outdoor temperatures, when the outdoor temperature is below 7ºC it needs support to maintain the level comfort. During October and November, April and May they work well the months of December, January, February and March need a support from another heat system, in cold areas.

Electric radiators, heat accumulators, infrared systems, convectors, alter the quality of the air due to the problems of electromagnetic fields, and if they work above 150ºC they burn the dust in the air and consume oxygen, in a way that lowers comfort.

Butane stoves are not recommended under any circumstances due to the consumption of oxygen and the high cost of energy.


Table to calculate the power you need in your home if you install the electric boiler by ete based on the outside temperature, the surface to be heated estimating quality wall and window insulation.

If the isolations are medium type, the power of the table is multiplied by 1.25.

If the isolations are low type, the power of the table is multiplied by 1.5.

For example: a 120m2 house, minimum outside temperatures of -3ºC with high quality insulation on walls and windows.

We will install a 4.5kW 230V II electric boiler by ete

If the isolations are medium type, the power would be 4.5×1.25, the boiler would be 6kw 230V II.

In the case of low type isolators it would be 4.5×1.5, the power would be 7.5kw 230V II.

Energy consumption in the coldest months with a daily heating program from 2 to 10 p.m. (8 hours) 4.5x 8 = 36 kWh per day, estimating the price of kWh at €0.1, spending in the colder months would be from 36kwh for 30 days 1080kwh x 0.1 = €108 cooler month.

Each with this table and depending on your heating program, you can calculate the power you need and the consumption in the coldest months.

Now compare the consumption you currently have with your heating system and see how much you save in addition to the advantages of having high-tech equipment that will last many years without breakdowns or maintenance costs.

The data is conclusive and difficult to dispute, we bring you the technology and experience of thousands of equipment that have been in operation since 1977. If you want more extensive information, please contact us and the Thermic Electric Solutions technicians will do a specific study of your case.

Pollution and Health

Today I talk about pollution and health now, I usually talk about the environment thinking about the future.

In large and small meetings where the environment is discussed, programs are made to reduce pollutant emissions for the future and that’s fine.

It is not necessary to be an expert to distinguish the air we breathe in the cities and the one we breathe in the countryside, in the mountains or by the sea in undeveloped areas.

I spend part of the time in a small town in Castilla outside the town center in a house with a high-tech electric heating equipment and when a car passes in front of my house, it leaves a trail of bad smell from the exhaust pipe for a few minutes, I also have to endure the chimneys of the heating with combustion boiler of some neighbor, both are unbearable because the air is polluted and our instinct tells us that we are attacking our health.

In the countryside a car passes and our instinct tells us “care danger to your health”, in the city thousands of cars pass by and our instinct is stunted and tells us nothing, but our body is being brutally attacked.

Making a simple analysis of the functioning of the human body, the air we breathe is vital for the proper functioning of all systems. The body is made up of trillions of cells that make up all the structures and are continuously consuming to stay alive, carbohydrates and oxygen.

What happens when a person stops breathing oxygen, who dies, what happens when a cell stops receiving oxygen, who dies. What happens when millions of cells that make up the structures and organs die, which cease to function properly and the disease, muscles, bones, heart, lungs, kidneys, liver, veins, arteries, brain, etc. occur.

What is the emotional and economic cost of diseases? How many people die daily worldwide because of the lack of oxygen in the air they breathe?


Today, August 7, 2019, billions of people living in cities around the world are getting sick from the lack of oxygen in the air they breathe. It is good that we think about the future but it is an aberration that we are not all aware of the problem of lack of oxygen in the air of cities. If there were no food, people would mobilize even with violence to demand it, because we have to do the same if oxygen is lacking.

In 1969 I participated in a movement in the media against pollution caused by coal and fuel in the air of Madrid, we knew that in areas where there was vomiting on the sidewalks were areas of high pollution. In 1971 we managed to ban new heat installations with coal and began to burn in the combustion boilers a product less polluting than fuel and which forced diesel to burn from 1976.

Since then and almost 50 years have passed the city council of Madrid has not created norms to improve air quality, it is true that gas is burned that is less polluting but still emits CO2.

Since 2014 I have carried out research work on air quality in closed sports facilities and I have made several CO2 measurements and in all of them there are usually more than 2000ppm.

I have been able to verify that when a person is in a place with a concentration above 2000ppm of CO2, dizziness, nausea, vomiting and headaches occur, some exercise rooms have measurements above 4000ppm.

The main polluting elements, cars, fireplaces and people in enclosed spaces are perfectly located.

There is an awareness of the need to eliminate cars and plans and programs have been created for the elimination of the most polluted areas of the city and a timetable for the elimination of combustion cars by 2040.

It is urgent that programs and plans for the elimination of the combustion boiler chimneys of heaters and industries are created, it is urgent that the installation of new combustion boilers, whether of gas, diesel or bio fuels, is prohibited and fixed 2040 as the deadline for the change of all combustion boilers.

Current technology is prepared to change all combustion boilers for high performance electrical equipment to produce heat for industry and heating. The pollutant emissions produced in the wind, solar thermal and photovoltaic electricity production facilities are minimal.

We have experience on the situation of new technologies to produce heat since we apply them daily, in all cases the savings in consumption due to high efficiency is greater than 50% compared to combustion boilers, as is the case with cars, traveling 100km with fuel costs about € 7, traveling 100km with traveling 100km with electricity costs € 1.

Think of us in our day to day without losing sight of the future we will leave our children.

Steam boilers for autoclaves

The new technologies in the steam produccion equipments allows to have a cost-effective installation, lower power and lower energy bill.

The steam boilers for autoclaves are being transforming with new technologies as ete applies in its steam boilers, the target of this new technology is to simplify installations, reduce costs and breakdowns.

Since 1977 ete manufacture electric steam boilers, we have lived hundred of experiences about installation with steam for autoclaves sterilization.

The technology applied in the design and manufacture of ete’s steam boilers allows to change the way to make installations, make it easy: installing a boiler next to the autoclave (one or two meters distance), regulate temperature and steam pressure as the process requires.

The calculation of the power is the factor that most worries the technicians who manage and design the heat installations, we have known hundreds of cases in which the installation was oversized 6 times on the real heat needs, we have found projects and facilities that needed 100kw of power and the boiler was 600kw.

The technicians of Europea Térmica Eléctrica are specialists in calculating heat needs with a long experience, when you need to heat a process, provide us the data of your process:

  • kg or liters of product
  • process temperatures
  • In how many time process has to be done.

you will receive information about the ideal equipment, power, cost, and energy cost per liter or kg of the process, you will have a performance guarantee and a production cost guarantee.

The old way to make big installations with big combustion boilers tends to disappear for energy saving. The ete’s steam boilers has a 100% performance throughout the life of the boiler that is over 30 years. If you installed an electric steam boiler next to the autoclave there is no heat loss in the pipe networks.

According to the old techniques, 2 boilers are installed to solve the cleaning issues and avoid risks of production stoppages. The risks of stoppage due to breakdown are minimal and the cleaning work does not require stopping the installation or can be done in about 2 hours installing ete’s steam generators.

There is a belief that combustible energies are cheaper than electricity and in practice this is false, when ete’s technology is applied, the power of boilers is lowered by nearly 80% compared to combustion boilers, the purchase price decreases, the price of the installation and above all, it reduces the energy consumption in the process by 70%. They also lower maintenance costs and breakdowns.